4. Description of the RPCM Device
This tab has the following action buttons:
DELETE
— to delete the current SNMP community record;
EDIT
— to edit the current SNMP community record;
RELOAD
— to refresh information in the SNMP management panel.
ADD COMMUNITY
— to create a new SNMP community record;
To create a new SNMP community record, use the
ADD COMMUNITY
button. The "New SNMP
community" window will appear.
Figure 4.6.25. "New SNMP community" pop-up window.
You need to give community a name, choose whether it will be Read Only or Read/Write as well
as configure access list to define list of subnets that will be allowed access to this community.
Subnet format is network_address/subnet_mask, for example: 10.0.0.0/8 or 172.16.0.0/12 etc
To specify several subnets that need to have access to the community, type in the comma sepa-
rated subnet list, for example: “10.0.0.0/8, 172.16.0.0/12, 192.168.0.0/16”,
Note the Enabled switch. If it is turned off then this particular community will be created but will
not be active.
To confirm the creation of a new SNMP community entry, click
CREATE
button.
To cancel the creation, click
CANCEL
.
94