NautoPilot® 5000 Series
102-890.NG001-NG003
Operator Manual
Edition: 003
89
10000001052
2.3.6.5
Limit values
Figure 54: Limit values (Page function)
Table 13
Meanings of Limit Values (Page function)
Function
Figure 53/1
This adjustment is used during the control function of the Autopilot
and should be adjusted within the configured limits. It sets limits for
command rudder output of the Autopilot.
(Configuration value = maximum/physical rudder limits
Adjusted value in the Page function = limits for the control
loop).
Value range: 5
to Max. Rudder Angle, (in increments of 1
, de-
pends on configuration). Refer to Installation Manual, chapter on
Max. Rudder Angle.
Figure 53/2
Heading monitor activates an alert if the difference between the
Gyro heading and the Magnet heading exceeds this value
(see section 1.3.5).
Value range: 5
to 30
, (in increments of 1
). A
line will be displayed if function is not active.
Figure 53/3
Off Heading; activates an alert if the difference between set
heading and actual heading exceeds this value
(see section 1.3.6).
Value range: 5
to 30
, (in increments of 1
).
Figure 53/4
Course Trim; this value activates an alert if the adjusted angle
exceeds the actual heading.
This value defines the permitted angle between the actual course
and the actual heading (see also section 1.3.7).
Value range: 5
to 30
, (in increments of 1
).
Activated in Course Control and Track Control modes only.
Содержание NautoPilot 5000 Series
Страница 114: ...NautoPilot 5000 Series 102 890 NG001 NG003 Operator Manual 10000001052 98 Edition 003 Intentionally left blank ...
Страница 144: ...NautoPilot 5000 Series 102 890 NG001 NG003 Operator Manual 10000001052 128 Edition 003 ...
Страница 167: ...NautoPilot 5000 Series 102 890 NG001 NG003 Operator Manual Edition 003 151 10000001052 Intentionally left blank ...
