NautoPilot® 5000 Series
102-890.NG001-NG003
Operator Manual
10000001052
46
Edition: 003
1.4.8
Override
In general:
This mode is indicated (at the NautoPilot® Operator Unit) when a manual steering
element (steering control unit) with an override function interrupts a control mode
of the Autopilot.
This steering element can be a handwheel, a FU Tiller or an NFU Tiller.
To interrupt an Autopilot control mode a steering element must be configured for
this function before.
If a steering element interrupts an Autopilot control mode, it is displayed with
Override at the top right corner of the Autopilot display and the NautoPilot®
Operator Unit is inactive.
For the activation of an Override mode an NFU Tiller must have a short contact to
any direction and a FU Tiller or handwheel must be moved approx. 2
off the
current position.
For AS application:
For deactivation of an Override mode the Heading button at the NautoPilot®
Operator Unit must be pressed
or
at an Override Signal Unit (or devices with a similar function) the Autopilot button
must be pressed.
Please note:
After deactivation of an override mode, the Heading
Control mode at the Autopilot is automatically selected.
Caution!
It is advisable to check the actual rudder angle and the
actual heading before switch over to Heading Control mode
(actual heading
→
set heading).
Содержание NautoPilot 5000 Series
Страница 114: ...NautoPilot 5000 Series 102 890 NG001 NG003 Operator Manual 10000001052 98 Edition 003 Intentionally left blank ...
Страница 144: ...NautoPilot 5000 Series 102 890 NG001 NG003 Operator Manual 10000001052 128 Edition 003 ...
Страница 167: ...NautoPilot 5000 Series 102 890 NG001 NG003 Operator Manual Edition 003 151 10000001052 Intentionally left blank ...
