Raytheon Anschütz NautoPilot 5000 Series, Руководство оператора

Страница: 32 / 191

NautoPilot® 5000 Series
102-890.NG001-NG003
Operator Manual
10000001052
16
Edition: 003
Standalone application:
If the status Standby is displayed in Autopilot Display and the Main Steering Switch
is switched into a switch position with Autopilot control, the NautoPilot® is active at
once in Heading control.
Attention: The NautoPilot® starts to control at once (actual heading is set heading).
This is important to note especially during heading change.
AS application:
If the status Standby is displayed it means, that a NautoSteer System is active.
If manual mode (Manual is displayed at the top right corner) is active and the Main
Steering Switch is switched into position AUTO the status Standby is displayed at
the top right corner of the display and the NautoSteer System is ready for control.
The NautoPilot® starts to control after the Heading button is pressed (actual
heading is set heading).
-- -- -- -- (Not ready)
If a dotted line is displayed at the top right corner of the display the Autopilot
cannot be activated (neither in a Standalone application nor in an AS application).
It means, that the Autopilot is not able to perform any control function.
The reasons are for example no heading input or no speed input, and are
displayed as an alert message (see section table in the annex).
1.4.3 Operation mode Heading Control
The Heading Control operation is activated when the steering system is not in
manual mode or when the autopilot is active.
Heading Control can be performed with a heading value from a gyro compass,
from a magnetic compass or in connection with a track planning system.
The appropriate heading source can be selected via the NautoPilot® Operator Unit.
Once activated, the Autopilot controls the heading by comparing the set heading
value and the actual heading value. Other adjustable parameters (like yawing,
rudder economy or precision) are taken into consideration.