Raytheon Anschütz NautoPilot 5000 Series, Руководство оператора

Страница: 57 / 191

NautoPilot® 5000 Series
102-890.NG001-NG003
Operator Manual
Edition: 003
41
10000001052
the following alert appears on the display:
Indications Comment/Notes
An alert is displayed at the top bar of the display (see section 7).
Track Control Interrupted
No ECDIS Status
Track
Heading
Control
Control
2 pulses
Both messages swapping.
2 acoustical pulses.
The operating mode changes from Track
Control to Heading Control.
Acknowledge the alert.
Track Heading
Control
If the ship is at this moment on a track
section and not in a track change
maneuver, actual heading is taken as the
new set heading. As opposed to manual
change- over from Track Control to
Heading Control, the setting of the
maneuver parameters might maintain as
under Track Control.
I. e.:
On straight leg:
- All values will be adopted from
Heading Control mode.
On curved path:
- The radius planned for the next
track change maneuver is
maintained.
- The rudder limit remains at Max.
- Alert Check Settings is displayed
(see below).
If during automatic change- over from
Track Control to Heading Control - the
ship is in a track change maneuver, the
track course of the next track section is
taken as the new set course (preset
heading). The radius planned for the
current track change maneuver is taken
as maneuver parameter.
After the acknowledgement additional warning messages are displayed.
Check Settings
Rudder Limit/Rad/RoT
Track
Heading
Control
Control
2 pulses
Both messages swapping.
After acknowledgement (or adjustment)
of the Rudder Limit value and/or the
Rad/RoT value no message is displayed
and the ACK LED is no longer alight.
This message will be shown during
mode change on curved track only.