Annexes
R&S
®
ZNB/ZNBT
1559
User Manual 1173.9163.02 ─ 62
ENA Emulation Command
R&S
ZNB/ZNBT Default Parser Command
MMEMory:LOAD:[:STATe] <string>
MMEMory:MDIRectory <string>
MMEMory:STORe[:STATe] <string>
MMEMory:STORe:FDATa <string>
MMEMory:STORe:LIMit <string>
MMEMory:STORe:SEGMent <string>
MMEMory:STORe:SNP:DATA <filename>
MMEMory:STORe:SNP:TYPE:S1P <numeric>
MMEMory:STORe:SNP:TYPE:S2P <numeric1>,
<numeric2>
MMEMory:STORe:SNP:TYPE:S3P <numeric1>,
<numeric2>, <numeric3>
MMEMory:STORe:SNP:TYPE:S4P <numeric3>,
<numeric2>, <numeric3>, <numeric4>
MMEMory:STORe:STYPe {STATe | CSTate |
DSTate | CDSTate}
Always saves measurement conditions and calibra-
tion state (CSTate), regardless of what you set it to.
SENSe{1...4}:AVERage:CLEar
SENSe{1...4}:AVERage:COUNt <numeric>
SENSe{1...4}:AVERage[:STATe] {ON | OFF
| 1 | 0}
SENSe{1...4}:BWIDth[:RESolution]
<bandwidth>
[SENSe<Ch>:]BWIDth[:RESolution]
SENSe{1...4}:BWIDth[:RESolution]:
SELect NORMal | HIGH
[SENSe<Ch>:]BWIDth[:RESolution]:SELect
SENSe{1...4}:CORRection:COLLect[:
ACQuire]:LOAD <numeric>
SENSe{1...4}:CORRection:COLLect[:
ACQuire]:OPEN <numeric>
SENSe{1...4}:CORRection:COLLect[:
ACQuire]:SHORt <numeric>
SENSe{1...4}:CORRection:COLLect[:
ACQuire]:ISOLation <numeric1>,
<numeric2>
SENSe{1...4}:CORRection:COLLect[:
ACQuire]:THRU <numeric1>, <numeric2>
[SENSe<Ch>:]CORRection:COLLect[:
ACQuire]:SELected
SENSe{1..4}:CORRection:COLLect:CKIT[:
SELect] <integer>
[SENSe:]CORRection:CKIT:SELect
SENSe{1...4}:CORRection:COLLect:ECAL:
ISOLation[:STATe] {OFF | 0}
None (no action)
ENA emulation commands
