QIAcube Connect MDx User Manual 12/2020
66
Setup screen
The software will automatically proceed to the next screen. Depending on the scanned kit bar
code, the software may skip the
Material
and/or
Protocol Selection
screens. The software will
skip the selection screen if the required information is provided by kit bar code scanning.
3.
To enter information in the next screens, follow the instructions provided in the sections below.
Depending on your selections, the number and order of the screens displayed on your
instrument may vary.
Each section below contains a screenshot image. Follow the instructions in that section with
the corresponding screen displayed on your instrument.
In general, press
Next
to proceed to the next screen, or press
Back
to return to the previous
screen.
Next
will only be active if all required information has been entered in the current
screen.
Important
: Do not use the
Next
button while the robotic arm is still moving.
Many screens have
Up
(
) and
Down
(
) arrow icons to scroll. Make sure to scroll all texts
down to the end and follow the instructions completely.