QIAcube Connect MDx User Manual 12/2020
15
WARNING
Toxic fumes
[W15]
Do not use bleach to disinfect used labware. Bleach in contact with salts from
the buffers used can produce toxic fumes.
2.6
Waste disposal
Used labware, such as sample tubes, QIAGEN spin columns, filter-tips, buffer bottle and enzyme
tubes, or rotor adapters, may contain hazardous chemicals or infectious agents from the purification
process. These hazardous wastes must be collected and disposed of properly according to local
safety regulations.
For more information about how to dispose of the QIAcube Connect MDx, see section 9.6, Waste
Electrical and Electronic Equipment (WEEE).
WARNING
Hazardous chemicals and infectious agents
[W16]
The waste may contain toxic material and must be disposed of properly. Refer
to your local safety regulations for proper disposal procedures.
2.7
Mechanical hazards
The hood of the QIAcube Connect MDx must remain closed during operation of the instrument.
Only open the hood when instructed to do so by the instruction for use.
While loading the worktable, always stand clear of the instrument. Do not lean on the worktable
when the robotic arm of the instrument is moving to reach loading position with its lid open. Wait
until the robotic arm completed its movements before you start to load or unload.
WARNING
Moving parts
[W17]
Avoid contact with moving parts during operation of the QIAcube Connect
MDx. Under no circumstances should you place your hands under the robotic
arm when it is lowering. Do not attempt to move any tip racks or tubes whilst
the instrument is operating.
