QIAcube Connect MDx User Manual 12/2020
54
14.
Push the foam until the rear end touches the back wall of the instrument. Ensure that the arm is
held firmly in place and cannot move.
15.
Make sure that the QIAcube Connect MDx hood can be closed properly. The hood should
lightly brush against the foam.
16.
Place the accessories into the waste drawer. The following accessories should be packed in
air cushion bags:
Rotor key
Allen key
Rotor nut
USB flash drive
WLAN module
Shaker rack plugs
Shaker adapter
17.
Place the handheld scanner into dedicated handheld scanner box.
18.
Place the QIAcube Connect MDx onto the pallet and put the black foam lid over the top of the
instrument. Place the box onto the instrument.
Important
: When lifting the QIAcube Connect MDx, slide your fingers under both sides of the
instrument and keep your back straight.
Important:
Do not hold the touchscreen display while lifting the QIAcube Connect MDx, as this
might damage the instrument.
WARNING
Risk of personal injury and material damage
[W2]
The QIAcube Connect MDx is too heavy to be lifted by one person. To
avoid personal injury or damage to the instrument, do not lift the instrument
alone.
19.
Place the accessories into the black foam lid. The following accessories should be packed in
air cushion bags:
Rotor with swing-out buckets
Power cord
20.
Seal the outside edges of the carton with tape to protect against moisture.
Note
: Using the original package minimizes potential damage during transportation of the
QIAcube Connect MDx.
