Pulsar ULTRA 5, Инструкция по эксплуатации

Страница: 62 / 258

Page 54
To program the unit for Example 2 Level Monitoring and Control by
using the Quick Setup menu proceed as follows.
If required access the Program Mode
Key in the passcode 1997 and press ENTER
Using the ‘right’ arrow key go to the
Quick Setup menu press ENTER and
as prompted, by the questions, select the relevant option and ENTER .
Question Option
Level/Volume 1= Level App.
Control 1= Control Down
No. of Controls 1 = 1 Relay
Control No. 1 1 = Set Relay 1
No. of Alarms 2 = 2 Alarms
Type Alarm 1 1 = High
Alarm No. 1 2 = Set Relay 2
Type Alarm 2 2 = Low
Alarm No. 2 5 = Set Relay 5
Xducer (P101) 2 = dB6
Material (P102) 1= Liquid
Measnt Units (P104) 1 = metres
Empty Level (P105)
3.5 (metres)
Span (P106) 2.8 (metres)
Programming is now complete and the unit can be returned to the run mode,
press
CANCEL until Run Mode? Is displayed on the LCD press ENTER ,
and the Level Star 5 will return to the Run Mode .
Note
If relay setpoints do not meet the exact requirements of the application, they
can be modified to suit by pressing ENTER when, “For More Options Hit
Enter”, is displayed and entering new values to relay setpoints as required.
Alternatively, the relevant relay setpoint can be accessed either by the main
menu system or directly via parameter number and changed as necessary.