PRÜFTECHNIK ROTALIGN Ultra iS, Руководство по эксплуатации

Страница: 37 / 219

ROTALIGN Ultra iS Shaft handbook
36
With the icon highlighted, press
e
to access the “Licence Manager” screen. Use
f
/
g
to highlight ‘Shaft Alignment’, then press
e
to proceed with entering
the application licence code ( registration key ) in the editing box.
After successful registration, a green check mark appears next to the application, and
the application level appears as a suffix to the firmware version.
The application shaft alignment can now be started.
Please refer to section 8.6 for a brief description on upgrading from the Standard
Shaft application level to the Advanced Shaft level.
4.2 Horizontal machine alignment – preparing for the
alignment procedure
Before using the Shaft Alignment application, prepare the machines as described
below.
Switch off the machines before commencing work, and make sure that they
cannot be started accidentally!
4.2.1 Solid, flat foundation
A solid, rigid foundation is required to obtain correct, lasting shaft alignment that
allows long-term uninterrupted machine service.
4.2.2 Machine mobility
If the machine to be moved stands directly on the foundations, it cannot be lowered
for alignment correction. It is therefore advisable to start with about 2 mm (80 mils)
of shims beneath the feet of both machines. Hydraulic or screw-type positioning aids
are recommended for horizontal movement.
The three application levels
available are ‘Standard’,
‘Advanced’ and ‘Expert’ The
registered level will appear
after the firmware version.
WARNING
Switch off the machines before commencing work, and make sure that they
cannot be started accidentally!