PRÜFTECHNIK ROTALIGN Ultra iS, Руководство по эксплуатации

Страница: 12 / 219

11
Chapter 2: System description
2.1 Safety notes
ROTALIGN Ultra iS is to be used in industrial environments only for alignment of
turbine components, shafts, bores, measurement of straightness and flatness of
different surfaces. It is dust proof and water resistant with a rating of IP 65. Although
shockproof, care must be taken to ensure that the instrument is not subjected to
mechanical knocks. ROTALIGN Ultra iS must be operated only by properly trained
personnel. No liability will be assumed when components or operating procedures as
described in this manual are altered without permission of the manufacturer.
2.1.1 Symbols used in this handbook
The following symbols are used in this manual in order to draw the reader’s attention
to especially important text, such as possible sources of danger or useful operating
tips.
This symbol denotes general information and tips regarding operation of
ROTALIGN Ultra iS.
This symbol denotes information which must be followed in order to avoid
damage to equipment.
This symbol denotes information which must be followed in order to avoid
personal injury.
Numbers in red circles indicate the corresponding operating step described in
these instructions and must be performed exactly.
2.1.2 CE compliance and electromagnetic compatibility
ROTALIGN Ultra iS fulfills the EC Guidelines for electric devices and those relating to
electromagnetic compatibility as indicated in the conformity certificate attached in the
appendix. The certificate may also be downloaded from the PRÜFTECHNIK website.
Note that the necessary
application firmware
[bore alignment,
flatness, straightness
among others] must be
purchased, installed and
licenced.
This symbol denotes general information and tips regarding operation of
ROTALIGN Ultra iS.
This symbol denotes information which must be followed in order to avoid
damage to equipment.
This symbol denotes information which must be followed in order to avoid
personal injury.
Numbers in red circles indicate the corresponding operating step described in
these instructions and must be performed exactly.
Note
CAUTION
WARNING
1
Safety notes