Printronix P6000L, Руководство пользователя

Страница: 160 / 234

Interfaces 7-2
Ready Line - A high true level from the printer indicating ac power and dc voltages are preĆ
sent, paper is loaded properly, and the printer is not in a check condition.
On Line - A high true level from the printer indicating the Ready Line is true and the ON
LINE switch on the control panel has been activated.
Data Request - A high true level from the printer to synchronize host data transmission with
printer timing.
Data Strobe - A high true pulse from the host to indicate that data is ready. The data strobe
remains high until the Data Request line goes false.
Data Lines - Eight high or low levels from the host that specify character data, plot data, or a
control code. Sensing Data Line 8 is controlled by printer configuration.
+5 Volt Test - +5 Vdc output for operating the Printronix test exerciser.
Paper Instruction (PI) - Optional high true level EVFU signal from the host with the same
timing as the data lines. Sensing the PI line is controlled by printer configuration.
Interface Verification - Two pins on the interface connector jumpered together to allow the
user to verify proper installation of the interface connector.
Table 7-1.
Connector Pin Assignments for Dataproducts
Interface with AMP Connector
INPUT SIGNALS OUTPUT SIGNALS
SIGNAL PIN SIGNAL PIN
Data Line 1
Data Line 2
Data Line 3
Data Line 4
Data Line 5
Data Line 6
Data Line 7
Data Line 8
Paper Instr.
Data Strobe
Return
Return
Return
Return
Return
Return
Return
Return
Return
Return
Ready
On Line
+5 Volts
I/F Verif.
Not Used
Return
Data Request
(Test Only)
Ground
19
3
20
4
1
2
41
40
34
18
43
25
36
35
28
44
30
14
38
37
22
6
21
23
12
46,45
11, 27,
31
IBOF
Return
24,50
8,32
Return 5
Return 7
39
Pins not listed
are not connected
(Bottom of Form)