PRESONUS studiolive III series, Руководство пользователя

Страница: 36 / 232

24
4 Basic Mix Functions Overview StudioLive™ Series III
4.2 Fader Layers and Banks Owner’s Manual
Mix/FX Masters.
When enabled, the master level for Subgroups, FlexMixes, and FX
buses are available from your StudioLive control surface as follows:
启用后，
Subgroups
、
FlexMixes
和
FX
总线的主控电平可以从你的
StudioLive
控
制界面获得，如下所示：
• StudioLive 64S, StudioLive 32S, StudioLive 32SX, StudioLive 32, and
StudioLive 24. The 8 channel strips to the right of the Master fader control the
bus masters.
Master fader
主推子右侧的
8
个通道条，控制着总线的主控。
• StudioLive 32SC and StudioLive 16. The bus masters will be available on the
channel faders.
总线母线将可在通道推子上使用。
Press the Prev and Next buttons to scroll through the other available input channels
and output buses.
按
" Prev
上一步
"
和
" Next
下一步
"
按钮，滚动浏览其他可用的输入通道和输
出总线。
4.2.1 User Fader Layer
用户推子层
The User layer lets you choose a selection of channels that are visible when you press
the User button. This can be useful to access crucial channels quickly, especially in
mixes with high channel counts.
User layer
用户层可以让你选择一些通道，当你按下
User
按钮时，这些通道是
可见的。这对快速访问关键通道很有用，特别是混音中数量较多的通道。
To assign channels to the User layer, do the following.
要给
User layer
分配通道，请做以下工作：
1. Navigate to the User layer by pressing the User button.
按下
User
按钮，导航到
User layer
用户层。
2. Press Select on a channel strip to which you wish to assign a mixer channel
or any unused channel in the user layer.
按通道上的
Select
选择你希望分配混音器通道，或用户层中任何未使用的
通道。
3. The User Layer Assignment screen will be displayed on the Touch Display.
在
Touch Display
显示屏上，将展示
User Layer Assignment
。