PRESONUS studiolive III series, Руководство пользователя

Страница: 106 / 232

69
6 The Fat Channel
6.10 Input Controls
StudioLive™SeriesIII
Owner’s Manual
6.10.2
Input Meters
输入测量
On the left side of the Fat Channel control section, you’ll see the “Level” meter. This
meter gives you a visual indication of input signal level for the selected channel or
mix. On the right side, you’ll see meters that pertain to dynamics processing:“Comp”
shows compressor gain reduction, and“Gate”shows gate gain reduction.
在
Fat Channel
控制部分的左侧，你会看到
"Level"
表。这个电平表为你提供了所
选通道或混音输入的信号电平的视觉指示。在右边，你会看到与动态处理有
关的仪表。
"Comp"
显示压缩器的增益降低，
"Gate"
显示噪声门的增益降低。
6.10.3 Input Source Routing
输入源路由
While any Overview Screen is active, you will see the Input Source button in the
upper left hand corner. Touching this button will open the Input Source Screen. From
here you can select the sources for the different input types available for the currently
selected channel or bus.
当任何
"Overview"
屏幕处于活动状态时，你会看到左上角的
Input Source
按钮。
触控这个按钮，将打开
Input Source Screen
。你可以为当前所选通道或总线，选
择不同的输入类型的源。
By default, every input source is routed to its respective channel (Analog Input 1 to
Channel 1, USB Playback stream 7 to Channel 7, etc.). You can reset the routing to the
default setting at any time, by pressing the Reset button.
默认情况下，每个输入源都被路由到各自的通道（
Analog Input1
到
Channel 1
，
USB Playback stream 7
到
Channel7
，等等）。你可以通过按下
Reset
按钮，将路
由重置为默认设置。
Note:
Fora more detailed overview of the default channel routings,
please review
Section 14.2 .
注意：关于默认通道路由的详细的概述，请查看第
14.2
节。
Analog Input Source ( Input Channels only)
模拟输入源（仅限于
Input Channels
）
Press the Analog Input Source icon to select the input channel that will be active on
the currently selected channel when the source is set to Analog in the Fat channel.
Tap on an analog input to patch it to the current channel.
按
Analog Input Source
图标选择
input channel
，当输入源被设置为模拟时，将
在当前选择的通道上活动。 点击一个模拟输入，把它修补到当前通道上。