GB 02891 - Edition 05 - Oct 13
1/6
C 42
Monitoring system function table
Pump configuration
Use the hand held display module to access the parameter settings.
The settings are defined in the factory and protected by an access code
which disables parameter modifications.
Press the
SET
key.
When the code is displayed, (0 set at factory), press the
ENTER
key.
The access code can be customized
(see
Password
parameter of the
Management
menu folio 5/6).
Parameters can be load from one pump to another.
This can be done if the pump is to be replaced or when installing a new
pump
C 44.
ENTER PASSWORD
* 0 *
adixen Vacuum Products - Operating instructions - A3P Series
