2/3
C 41
GB 02890 - Edition 02 - November 07
Start up of the monitoring system
For A603P pump model, don’t forget to check the direction of rotation before
starting up the pump
B 51
.
adixen Vacuum Products
MONITORING VX.XX
PRESS ENTER
OR AUTO CONNECTION
FOR ALL PUMP
SERIAL XXXXXXX
MAITING.....
OLWRTA
23 H LOC N2 LS RT
PUMPING STOPPED
15/10/05 10H10
Main switch
Monitoring start up
Connect the hand held display module.
Position the main switch on position
1
.
At the first hand held display module connection,
the monitoring identifies the pump.
The display lights up and the following screens
appear:
Initialize the system by pressing on
ENTER
.
The monitoring displays the status of the
pump
Because it is the first connection, it is necessary
to take the pump control via the
CONTROL
key:
a star appears on the left side of the display
.
Access to the
parameter settings
The programing made at the factory is protected by an access code
which disables parameter modification.
Press the
SET
key.
When the code is displayed, (0 set at factory),
press the
ENTER
key.
Access code and parameters can be customized
C 42
.
ENTER PASSWORD
* 0 *
Before using the monitoring, check that the mechanical and electrical
connections defined in the chapter B have been made.
adixen Vacuum Products - Operating instructions - A3P Series
