GB 02872 - Edition 03 - Oct 13
1/6
B 00
Safety instructions
Pump installation
General
Indicates a potentially hazardous situation which, if not avoided, could result
in moderate or minor injury. It may also be used to alert against unsafe
practices.
Indicates a potentially hazardous situation which, if not avoided, could result
in death or severe injury.
Indicates an imminently hazardous situation that, if not avoided, will result
in death or severe injury (extreme situations).
Indicates a potentially hazardous situation which, if not avoided, could result
in property damage.
Our products are designed to comply with current EEC regulations. Any
modification of the product made by the user is liable to lead to non-
compliance with the regulations, or even to put into doubt the EMC
(ElectroMagnetic Compatibility) performance and the safety of the product.
Manufacturer declines any responsibility for such operations.
The EMC perfomance of the product is obtained on the
condition that the installation complies with the EMC rules.
In particular, in disturbed environments, it is essential to:
use shielded cables and connections for interfaces,
stabilize the power supply line with meshing from the power supply
source to a distance of 3 m from the product inlet.
When the main switch is set to «0», the part supply between the power and
the main electrical switch, is energized.
Risk of electrical shock in case of contact.
Disconnect main electrical cable before any intervention.
The installation of the pump can only be performed by trained personnel.
adixen Vacuum Products - Operating instructions - A3P Series
