Using OmniStream
™
with Velocity
™
Device Manager
38
Device Operation
4
5
6
7
8
8
9
4. Click the
Mode
drop-down list and select
output
.
5. Click the
Input
drop-down list and select
Not Used
.
6.
Click the
SAVE
button.
7. For each of the available commands, click the
Mode
drop-down list and select
raw
.
The available commands are:
Display On
,
Display Off
,
Volume Up
, and
Volume Down
.
8.
Enter the command data in either ASCII or hexadecimal format using the
ASCII
or
HEX
fields.
9. Click the
SAVE
button.
10. Open a Telnet/SSH session with the decoder and trigger display control using the following command:
TrigRS232X Y
where
X
is the number of the serial port:
1
,
2
where
Y
is the command:
on
,
off
,
vol+
, or
vol-
.
