Using OmniStream
™
with Velocity
™
Device Manager
11
Accessing OmniStream Devices
The Velocity Device Manager uses multicast Domain Name Server (mDNS) to automatically discover each encoder
on the network.
By default, the OmniStream devices are set to DHCP mode, allowing a DHCP server (if present) to assign the
encoder an IP address. Once an IP address has been assigned, Velocity can be used to manage the product on the
network. Note that Velocity will only be able to discover encoders if they are on the same VLAN.
In order for Velocity to automatically assign multicast IP addresses to OmniStream devices, the destination IP
addresses for the session streams must be cleared.
Getting Started
1.
Launch a web browser and enter the IP address of Velocity, in the address bar.
2. Enter the required login credentials.
3. Click the
LOGIN
button.
NOTE:
The following steps are required
only
if a pre-existing multicast IP address
is
assigned to each session and if automatic assignment of these multicast IP addresses, using
Velocity, is desired.
