Using OmniStream
™
with Velocity
™
Device Manager
34
Device Operation
9
10
11
12
9. Login to the decoder and click the
IP INPUT
menu. Locate an Input that does
not
contain a defined
Multicast
Address
field. In this example,
Input 5
will be used. Note that if a multicast address was used in Step 7, then
that multicast address must be entered in the
Multicast Address
field under
Input 5
.
10. Click the
Enable
toggle switch to enable the Input. When an Input is enabled, the toggle switch will be green.
11.
Enter the UDP port, from Step 9, in the
Port
field.
12. Click the
SAVE
button.
13. Click the
SERIAL
menu, and under
Serial Port 1
, click the
Mode
drop-down list and select
serial
.
14. Click the
SAVE
button.
13
14
