PACOM DmartIP-8E, Руководство пользователя

Страница: 66 / 88

User’s Manual
58
Event monitoring lasts for the dwell time set for event recording. After the dwell time has elapsed, the monitor
returns to the previous screen unless another event has occurred. If you want to return to the live monitoring mode
before the dwell time has elapsed, press the
DISPLAY
button or one of the camera buttons.
Covert Camera
If a camera is set up as Covert 1 in the Camera setup screen (General tab), that camera will not be displayed unless a
user with Covert Camera View authority logs into the system. However the camera title and status icons will be
displayed on the monitor.
If a camera is set up as Covert 2 in the Camera setup screen (General tab), that camera appears to be Off unless a user
with Covert Camera View authority logs into the system. The camera title will be grayed out and status icons will
not be displayed on the monitor.
NOTE: When a camera is set up as Covert 1 , the NVR displays the camera title and status icons on the covert
video. When set up as Covert 2 , the NVR displays only the camera title on the covert video.
If a user who has Covert Camera View authority logs into the system, the user can view video from cameras set to
Covert 1 or Covert 2 including the camera titles and status icons.
Recording Video
Once you have installed the NVR following the instructions in Chapter 2 — Installation , it is ready to record. The
NVR will start recording based on the settings you made in the Record setup screen. See Chapter3 — Configuration.
Recycle On
or Recycle Off . The factory default is Recycle On . It does this by recording over the oldest video
once the hard disk is full. Setting the NVR to Recycle Off causes it to stop recording once the hard disk is full.
Although you will be able to record without changing the unit from its original factory settings, you will want to take
advantages of the NVR’s many tools. See
Chapter 3 — Configuration for detailed descriptions of the recording
mode options.
Panic Recording
Selecting (Panic) in the Live Monitoring menu or Search menu, or pressing the
PANIC
button starts panic
recording of all cameras. Selecting or pressing the button again stops panic recording. If you set the Panic
Recording Duration in the Record setup screen (General tab), panic recording will stop automatically according to
the preset duration as long as is not selected or the
PANIC
button is not pressed.
NOTE: When the NVR is not in the Recycle mode and all available storage space has been used, panic
recording will not operate.
Recording Audio
If the NVR was set up to record audio, it will record audio from up to eight inputs when video is recording.
NOTE: Make certain you comply with all local and federal laws and regulations when recording audio.