PACOM DmartIP-8E Скачать руководство пользователя страница 18

Страница: 18 / 88

User’s Manual

Arrow Buttons

These buttons are used to navigate through menus and GUI. You can also use them to change numbers by highlighting
a number in the menu and using the

and

Down

arrow buttons to increase or decrease the number’s value.

Pressing the

Left

and

Right

buttons moves through screen pages in the Live Monitoring mode and Search mode.

Alarm Button

Pressing the

ALARM

button resets the NVR’s outputs including the internal buzzer during an alarm.

Sequence Button

When in the Live Monitoring mode, pressing the

SEQUENCE

button displays live channels sequentially.

Menu Button

In the Live Monitoring mode and Search mode, pressing the

button displays the menu icons at the top of the

screen. Pressing the button also hides the menu icons. During menu setup, pressing the button closes the current
menu or setup dialog box

Playback Buttons



Rewind:

Pressing the

button plays video backward at high speed. Pressing the button again toggles the

playback speed from

and



Play/Pause:

Pressing the

button plays back video at regular speed and pressing the button again pauses video.

The screen displays when the NVR is in the Pause mode and the screen displays when the NVR is playing back
video.



Fast Forward:

Pressing the

button plays video forward at high speed. Pressing the button again toggles the

playback speed from ,

and



Stop:

Pressing the

button stops playback and enters the Live Monitoring mode.



Backward:

When in the pause mode, pressing the

button moves to the previous image.



Forward:

When in the pause mode, pressing the

button moves to the next image.

In the Live Monitoring mode, pressing any playback button enters to the Search mode.

Bookmark Button

When in the playback mode, pressing the

BOOKMARK

button adds the current playback point to the bookmark list or

moves to the registered bookmark point.

Panic Button

Pressing the

PANIC

button starts panic recoding of all camera channels, and displays on the screen. Pressing the

button again will stop panic recording.

Layout Button

Pressing the

LAYOUT

button toggles between different display formats. The available formats are: 2x2 and 3x3.

Freeze Button

Pressing the

FREEZE

button freezes the current live screen.

Содержание DmartIP-8E

























































































Результаты поиска

Содержание DmartIP-8E

Отзывы:

Бренды по названию

Популярные бренды

PACOM DmartIP-8E, Руководство пользователя

Результаты поиска

Содержание DmartIP-8E

Отзывы:

Бренды по названию

Популярные бренды