PACOM DmartIP-8E, Руководство пользователя

Страница: 35 / 88

Network Video Recorder
27
CAUTION: When more than one disk is installed in the unit, the NVR records video on the disks
sequentially based on time. And these sequentially recorded videos have the advantage
that you can search recorded video easily even though a disk is removed from the
unit. However, video recorded in the same time range might be saved on different
disks by channel and by the type of recording mode. Once the Limit Time-Lapse
Recording is set to On, the NVR will maintain this recording limitation even after
disabling the function. If you want the NVR to record video on the disks sequentially
based on time again, you must format all disks that are currently used for recording.
The NVR can record up to eight audio inputs. Highlighting Use Audio Recording and pressing the button
toggles between On and Off.
Highlighting
Network Recording Failover
and pressing the button toggles between On and Off. When set to on,
the NVR records video temporarily saved on the camera when the network failure restores.
Highlighting Use Panic Recording and pressing the button toggles between On and Off.
Highlight the Panic Recording Duration box and set the duration of panic recording. Panic recording will stop
automatically after the preset duration as long as the
PANIC
button is not pressed to stop the panic recording. You
can set the dwell from 5 minutes to 1 hour. Select
No Limit
if you want to stop panic recording manually.
Highlight the Panic Recording Profile box and select the profile for panic recording.
Schedule
Highlight
Schedule and press the button, and the Schedule setup screen appears.
< Simple Mode > < Advanced Mode >
Figure 13 : Record – Schedule setup screen.
You can program the NVR to record only during certain times based on time, day of the week, and holidays. The
smallest time segment you can use is 15 minutes.
Highlighting Schedule On and pressing the button toggles between On and Off. In the Schedule On mode, the
NVR records video based on the schedule established in the Schedule screen. When turning Schedule recording Off,
you will be asked to confirm your decision, and displays at the top-left corner of each camera screen. Panic
recording will function even when Schedule is turned off. displays during panic recording.
Highlight the Schedule Mode box and press the button. You can select between Simple Mode and Advanced
Mode . Selecting Advanced Mode allows you to set up individual recording schedule for each event.
NOTE: Changing the schedule mode will reset all event and action statuses.
Highlight the + and press the button to add a schedule item.