PACOM DmartIP-8E, Руководство пользователя

Страница: 46 / 88

User’s Manual
38
NOTE: The following description is for Motion setup.
Video motion detection can be turned On or Off for each camera.
Highlighting the box under the
Sensitivity
heading and pressing the
button allows you to adjust the NVR’s sensitivity to motion for Daytime
and Nighttime independently. There are five settings with
1
being the
least sensitive and
5
being the most sensitive.
You can define the area of the image where you want to detect motion; e.g., a doorway. Highlight the box under the
Zone
heading, and press the button. The Motion Detection Zone screen displays.
The Motion Detection Zone screen is laid over the video for the
selected camera. You can set up motion detection zones by
selecting or clearing blocks.
NOTE: You can set up motion zones one block at a time in
groups of eight (four for the 4-channel NVR) individual
block groups. A block group is positioned within the image
area using the Up and Down arrow buttons, and individual
blocks within the block groups are selected or cleared
using the camera buttons.
Press the button to display the menu screen. The menu on the setup screen has the following functions:
Select – Activates highlighted blocks to detect motion.
Clear – Deactivates highlighted blocks so that they will not detect motion.
Reverse – Activates inactive highlighted blocks and deactivates active highlighted blocks.
Select All – Activates all blocks to detect motion.
Clear All – Deactivates all blocks so that they will not detect motion.
Reverse All –
Activates inactive blocks and deactivates active blocks.
OK – Accepts changes and closes Zone setup.
Cancel – Exits Zone setup without saving changes.
You can adjust the minimum number of detection blocks that must be
activated to trigger a motion alarm. Highlighting the box under the
Min. Blocks heading and pressing the button allows you to adjust
the minimum number of detection blocks for Daytime and Nighttime
independently. Smaller numbers provide greater sensitivity because
fewer detection blocks must be activated.
Highlight the box under the Actions and press the button. The NVR can be set to react to motion detection
differently for each camera. Each camera can be associated with another camera, trigger an Alarm-Out connector,
sound the NVR’s internal buzzer, and/or notify a number of different devices.
You can control excessive event logging and remote notification of motions detected after the motion dwell time by
adjusting the motion ignoring dwell intervals. Highlight the box beside
Motion Ignoring Interval and press the
button. A list of intervals ranging from 1 to 5 seconds or Never appears. The NVR will not log and notify motion
events occurred during the preset interval range.
NOTE: The record action for motion events will not be affected by the Motion Ignoring function.
Highlighting Daytime Setup and pressing the button allows you to set up the Daytime range.
Highlight the box beside
Daytime
and press the button. Use
the Up and Down arrow buttons to set the Daytime range. The
NVR will consider the remaining time range as the Nighttime.