PACOM DmartIP-8E Скачать руководство пользователя страница 33

Страница: 33 / 88

Network Video Recorder

Figure 11 : System – Storage setup screen.

The information in the

Type

column describes the storage device.

The capacity of the storage device is displayed in the

Capacity

column.

The

Format

column displays whether the device is used for recording (

Record

) or not (

Not Using

Not formatted

indicates the device is not formatted.

Highlight the box in the

Format

column for the desired storage device

and press the button. You will be able to format the device for

recording or archiving. When selecting

Not Using

from

Use As

and

highlighting the

Format

button, the device will not be used for recording.

NOTE: The NVR does NOT support USB hard disk drives with a version lower than 2.0.

The

Information

column displays whether the device is being used or not.

Other

indicates the device has been used

for another NVR.

Highlight the box in the

Information

column for the desired storage device and press the button. You will be able

to check the time information about recorded data.

If you want to erase recorded data on the selected device,
highlight

Clear

and press the button. You will be

asked whether or not you want to delete the data.

If you want to use a USB hard disk drive, highlight

Use

and press the button after connecting the device.

Highlight

Don’t Use

and press the button if you want

to stop using the device.

CAUTION: Do NOT disconnect the USB cable or the power from the device while copying video

clips. If the USB cable is disconnected while copying video clips, archived data might
be lost.

Содержание DmartIP-8E

























































































Результаты поиска

Содержание DmartIP-8E

Отзывы:

Бренды по названию

Популярные бренды

PACOM DmartIP-8E, Руководство пользователя

Результаты поиска

Содержание DmartIP-8E

Отзывы:

Бренды по названию

Популярные бренды