PACOM DmartIP-8E, Руководство пользователя

Страница: 47 / 88

Network Video Recorder
39
NOTE: The following description is for TripZone setup.
Figure 22 : Event – Video-Analytics (TripZone) setup screen.
Highlighting the box under the Sensitivity heading and pressing the
button allows you to adjust the NVR’s sensitivity to tripzone detection for
Daytime and Nighttime independently. There are five settings with
1
being the least sensitive and 5 being the most sensitive.
You can define the area of the image where you want to detect motion; e.g., a doorway. Highlight the box under the
Zone heading, and press the button. The Zone screen displays.
The Zone screen is laid over the video for the selected camera.
You can set up tripzone detection zones by selecting or clearing
blocks.
NOTE: You can set up zones one block at a time in groups
of eight (four for the 4-channel NVR) individual block
groups. A block group is positioned within the image area
using the Up and Down arrow buttons, and individual
blocks within the block groups are selected or cleared
using the camera buttons.
Press the button to display the menu screen. The menu on the setup screen has the following functions:
Select –
Activates highlighted blocks to detect tripzone.
Clear – Deactivates highlighted blocks so that they will not detect tripzone.
Reverse – Activates inactive highlighted blocks and deactivates active highlighted blocks.
Select All – Activates all blocks to detect tripzone.
Clear All – Deactivates all blocks so that they will not detect tripzone.
Reverse All – Activates inactive blocks and deactivates active blocks.
Direction – Select the direction of the tripzone to be considered as an event.
OK – Accepts changes and closes Zone setup.
Cancel – Exits Zone setup without saving changes.
Highlight the box under the Actions and press the button. The NVR can be set to react to tripzone detection
differently for each camera. Each camera can be associated with another camera, trigger an Alarm-Out connector,
sound the NVR’s internal buzzer, and/or notify a number of different devices.
Highlight the box beside TripZone Ignoring Interval and press the button. A list of intervals ranging from 1 to 5
seconds or Never appears. The NVR will not log and notify tripzone events occurred during the preset interval range.