PACOM DmartIP-8E, Руководство пользователя

Страница: 39 / 88

Network Video Recorder
31
IP Address
Highlight
IP Address and press the button, and the IP Address setup screen displays.
Figure 17 : Network – IP Address (Manual) setup screen.
Highlight the box beside
Type
and press the button. You can select the type of network configuration from:
Manual
,
DHCP
and
ADSL (with PPPoE)
. Select the desired type and press the button.
Selecting Manual from the Type allows you to set up LAN parameters manually.
Change the numbers by highlighting them and using the Up and Down arrow buttons to increase or decrease the
number. The factory default LAN settings are:
IP Address: 192.168.1.129
Gateway: 192.168.1.254
Subnet Mask: 255.255.255.0
NOTE: You will need to get the appropriate IP Address, Gateway and Subnet Mask from your network
administrator.
Highlight the box beside DNS Server . Press the Up and Down arrow buttons to set the IP address of the DNS server.
Highlight the Port Number Setup… box and press the button. The Port Number Setup screen appears.
NOTE: You will need to get the appropriate Port Numbers for each RAS and WebGuard related program
(Admin, Callback, Watch and Search) from your network administrator.
Change the numbers by highlighting them and using the Up and
Down arrow buttons to increase or decrease the number. The
factory default Port settings are:
Remote Admin: 8200
Remote Callback: 8201
Remote Watch: 8016
Remote Search: 10019
NOTE: The system restarts automatically after changing the port settings.
Do NOT use the same port number for two different programs, otherwise, the NVR cannot be
connected with the PC running RAS or WebGuard.
CAUTION: When changing the port settings, you must change the port settings on the PC
running RAS as well. Refer to the RAS manual for details.