PACOM DmartIP-8E, Руководство пользователя

Страница: 43 / 88

Network Video Recorder
35
Notification
Highlight Notification and press the button. The Notification setup screen displays.
Figure 20 : Network – Notification setup screen.
You can add and edit notification schedules. Highlight the
+
and press the button to add a schedule. Highlighting
the boxes under the
Column
heading and pressing the button allows you to edit the information in those boxes.
The Day box allows you to select the days that the notification schedule will be active. The choices are: Sun, Mon,
Tue, Wed, Thu, Fri, Sat, M~F, Hol and All.
The Range box allows you to set the time that the notification schedule will be active in 15-minute increments from
00:00 to 24:00.
Highlight the desired box under the Notify heading, and press the button. The Schedule Notify menu appears.
You can toggle the entire list On and Off by highlighting Notification and
pressing the button. You can toggle the individual items On and Off
by highlighting that item and pressing the button. Highlight OK and
press the button to accept your changes.
NOTE: For the Notify action, the notify item you select should be
enabled in the Notification setup screen and the NVR should be
registered in the RAS (Remote Administration System).
Highlight Callback – Setup and press the button, and the Callback screen appears. The NVR can be set up to
contact a computer running RAS (Remote Administration System) when an event occurs.
Highlight the box under the
No.
heading and press the button to toggle between
On and Off. You will only be able to change the IP addresses if
No.
is enabled.
Highlight the IP Address box that you want to change and press the button.
Use the arrow buttons to enter the IP address of the computer you want contacted
during an event. You can enter up to five IP addresses.
Highlight the box beside Retry and enter the number of times you would like the
NVR to try contacting the computer. You can select from 1 to 10 retries.