PACOM DmartIP-8E Скачать руководство пользователя страница 40

Страница: 40 / 88

User’s Manual

Highlight

Use UPnP

and press the button to toggle between On and Off. When it is On, port forwarding from the

NAT (Network Address Translation) device to the NVR will be enabled automatically via UPnP (Universal Plug and
Play) service. This function will be especially useful when accessing a port on a private IP address.

NOTE: For the UPnP service to work, the NAT device should support the UPnP Port Forwarding function and

the function should be set to enabled.

You cannot change the port settings when

Use UPnP

is On.

Highlight the

Status

box and press the button to display the port numbers forwarded from the NAT device via

UPnP service.

Selecting

DHCP

from the Type and highlighting

Save

button reads the current IP address of the NVR configured by

DHCP (Dynamic Host Configuration Protocol) network.

Highlight

Auto

(Default) and press the button to toggle between On and Off. When it is On, the NVR will obtain

the IP address of the DNS server automatically.

NOTE: Selecting

Auto

will only be enabled when the NVR is configured for DHCP or an ADSL network.

Selecting

ADSL (with PPPoE)

allows you to set up the ADSL network.

Highlight the box beside

and press the button. A virtual keyboard appears allowing you to enter the ID for

ADSL connection.

Highlight the box beside

Password

and press the button. A virtual keyboard appears allowing you to enter the

password for ADSL connection.

NOTE: Entering

the

and

Password

and highlighting

reads the current IP address of the NVR configured

by the ADSL network.

If the NVR is configured for DHCP or an ADSL network, the IP address of the NVR might change
whenever the unit is turned on.

DVRNS

Highlight

DVRNS

and press the button, and the DVRNS

setup screen displays.

Содержание DmartIP-8E

























































































Результаты поиска

Содержание DmartIP-8E

Отзывы:

Бренды по названию

Популярные бренды

PACOM DmartIP-8E, Руководство пользователя

Результаты поиска

Содержание DmartIP-8E

Отзывы:

Бренды по названию

Популярные бренды