PACOM DmartIP-8E, Руководство пользователя

Страница: 49 / 88

Network Video Recorder
41
Alarm-In
Highlight
Alarm-In
and press the button, and the Alarm-In setup screen appears.
Figure 24 : Event – Alarm-In setup screen.
The alarm terminal strip on the back of the NVR has inputs associated with each alarm. You can set up each input on
the
Alarm-In screen. You can turn each input On or Off by highlighting the alarm number and pressing the button.
Each input can be given a title. Highlight the desired Title box and press the button. A virtual keyboard appears
allowing you to enter a title name.
Each input can be set as NO (normally open) or NC (normally closed).
Highlight the box under the Actions and press the button. You can set the actions the NVR will take whenever it
senses an input on one of its alarm input connectors. Alarm input can be associated with cameras, trigger an
Alarm-Out connector, sound the NVR’s internal buzzer, and/or notify a number of different devices.
You can set up the NVR to start panic recording whenever it senses an input on one of its alarm input connectors.
Highlight the box beside
Panic Record and press the button. A list of Alarm Inputs appears, and you can select
which alarm input you want associated with panic recording. The NVR will continue panic recording until an input
on the selected alarm input is released as long as the
PANIC
button is not pressed to stop the panic recording.
Video Loss
Highlight
Video Loss and press the button, and the Video Loss setup screen appears.