PACOM DmartIP-8E, Руководство пользователя

Страница: 51 / 88

Network Video Recorder
43
Highlighting Schedule On and pressing the button toggles
On and Off. When set to On, you can select the day, time range
and interval that you want the NVR to run self-diagnostics on the
recorder. The
Interval can be selectable from 1 min. to 7 days or
Never . Highlight the + and press the button to add a schedule
item. The box allows you to delete a check recording schedule.
Highlight the
Settings
box beside
Disk Almost Full
, and press the button. Select the percentage level of disk
usage at which you want the NVR to trigger an alert. Percentage levels range from 80% to 99%.
Highlight the Settings box beside Disk Bad , and press the button. Select percentage level of bad disk sectors at
which you want the NVR to trigger an alert. Percentage levels range from 10% to 90%.
Highlight the Settings box beside Disk Temperature , and press the button. Select the temperature of hard disk
drive at which you want the NVR to trigger an alert if the temperature exceeds the defined threshold. Refer to the
hard disk drive manufacturer’s documentation for the correct temperature setting.
The NVR can be set to react to system events. Highlight the Actions box beside the desired event and press the
button. System events can be associated with an Alarm-Out connector, sound the NVR’s internal buzzer, and/or
notify a number of different devices.
NOTE: Alarm-Out action cannot be set to System and Panic Record events.
For the Notify action to work, the NVR should be registered in the RAS (Remote Administration System).
Device Setup
Alarm-Out
Highlight
Alarm-Out
and press the button. The Alarm-Out screen allows you to change the settings and establish
a schedule for each alarm output from the NVR.
Figure 27 : Device – Alarm-Out setup screen.
You can add and edit alarm output schedules. Highlight the + and press the button to add a schedule.