![background image](http://html1.mh-extra.com/html/omron/sysmac-nx1p2-10-1-series/sysmac-nx1p2-10-1-series_user-manual_1633435498.webp)
Connection status
Source of error
Handling
General
Status
(hex)
Additional
Status
(hex)
Configuration
1
Configuration
2
Configuration
3
01
0106
Duplicate consumers:
Attempted to open multiple connections
for single-consumer data.
If the tag data
link is stopped
or started, this
error may oc-
cur according
to the timing,
but the system
will recover au-
tomatically.
Depends on
the target's
specifications.
(Contact the
target device's
manufacturer.)
If the tag data
link is stopped
or started, this
error may oc-
cur according
to the timing,
but the system
will recover au-
tomatically.
01
0107
Error code returned from target:
Attempted to close a connection, but that
connection was already closed.
This error does
not occur.
This error does
not occur.
This is not an
error because
the connection
is already
closed.
01
0108
Error code returned from target:
Attempted to open a connection with an
unsupported connection type.
This error does
not occur.
Check which
connection
types can be
used by the
target.
(Contact the
manufacturer.)
Only multicast
and point-to-
point connec-
tions can be
set.
Check which
connection
types can be
used by the
originator. (An
error will occur
if a connection
other than a
multicast or
point-to-point
connection is
set.)
01
0109
Error code returned from target:
The connection size settings are differ-
ent in the originator and target.
Check the connection (sizes) set in the originator
and target.
01
0110
Error code returned from target:
The target was unable to open the con-
nection, because of its operating status,
such as downloading settings.
Check whether
the tag data
link is stopped
at the target.
(Restart the tag
data link com-
munications
with the soft-
ware switch.)
Depends on
the target's
specifications.
(Contact the
target device's
manufacturer.)
Check whether
the tag data
link is stopped
at the target.
(Restart the tag
data link com-
munications
with the soft-
ware switch.)
01
0111
Error code returned from target:
The RPI was set to a value that exceeds
the specifications.
This error does
not occur.
Check the tar-
get's RPI set-
ting specifica-
tions.
Set the origina-
tor's RPI set-
ting to 10 sec-
onds or less.
16 Troubleshooting
16-12
NJ/NX-series CPU Unit Built-in EtherNet/IP Port User’s Manual (W506)
Содержание Sysmac NX1P2-10 1 Series
