Omron Sysmac NX1P2-10 1 Series, Руководство пользователя

Страница: 501 / 578

Connection status
Source of error
Handling
General
Status
(hex)
Additional
Status
(hex)
Configuration
1
Configuration
2
Configuration
3
01 0205 Error code returned from target:
There was a parameter error in the
frame used to open the connection. This error does
not occur. Depends on
the target's
specifications.
(Contact the
target device's
manufacturer.) Depends on
the originator's
specifications.
(Contact the
originator devi-
ce's manufac-
turer.)
01 0301 Error code generated by originator or re-
turned from target:
Total number of tag sets that are set to
the product was exceeded. Check the total
number of the
tag sets that
are set to the
product and set
the tag sets so
that the total
number does
not exceed the
maximum of
the allowable
number. Check the total
number of the
tag sets that
are set to the
product and set
the tag sets so
that the total
number does
not exceed the
maximum of
the allowable
number. Check the total
number of the
tag sets that
are set to the
product and set
the tag sets so
that the total
number does
not exceed the
maximum of
the allowable
number.
01 0302 Error code generated by originator or re-
turned from target:
The tag data link's allowable bandwidth
(pps) was exceeded. Check the con-
nection set-
tings (number
of connections
and RPI) at the
originator and
target. Check the tar-
get's connec-
tion settings
(number of
connections
and RPI).
Check the con-
nection set-
tings (number
of connections
and RPI) at the
originator and
target. Check the con-
nection settings
(number of
connections
and RPI) at the
originator and
target.
01 0311 Error code returned from target:
There was a parameter error in the
frame used to open the connection. This error does
not occur. Depends on
the target's
specifications.
(Contact the
target device's
manufacturer.) Depends on
the originator's
specifications.
(Contact the
originator devi-
ce's manufac-
turer.)
01 0312 Error code returned from target:
There was a parameter error in the
frame used to open the connection. This error does
not occur. Depends on
the target's
specifications.
(Contact the
target device's
manufacturer.) Depends on
the originator's
specifications.
(Contact the
originator devi-
ce's manufac-
turer.)
16 Troubleshooting
16-15
NJ/NX-series CPU Unit Built-in EtherNet/IP Port User’s Manual (W506)
16-2
Checking Status with the Network Configurator
16
16-2-2 Connection Status Codes and T
roubleshooting