OmniTek OTR 1001, Руководство пользователя

Страница: 351 / 390

OmniTek OTR1001 User Guide, v3.1 U-5
U.3 Exporting User Files
The steps in this section save User files to a chosen location e.g. on a USB memory stick. These
files are generally to be found in the appropriate default location but Generator Patterns can be
located anywhere across your disk structure.
Facilities are offered for exporting either all the User files in a particular category in the default
directory or just a selection of these files, and for picking out Generator Patterns from anywhere
on your disk. Facilities are also included for creating a folder in which to store the files.
Two ‘routes’ are provided through the export procedure: one intended principally for exporting
all the files from the default category; the other to be used where you want to select the files for
export individually. However, in practice either route can be used to select the files you require.
The description below is divided into two sections: one describing the steps used to export files
from their default location; the other describing the special features of exporting Generator
Patterns from outside the default location.
Exporting Files from their Default location
Control Panel Mouse & Keyboard
Route 1: Principally used to export all files
1. Display the Manage User Files dialogue as described in Section U.2.
2. Scroll to the category of user file you want to export in the left-hand side of the dialogue.
3. Select Export from the Button Bar.
4. If there is more than one User file of the selected category, the right-hand side of the dialogue
then shows a list of the files in the default location with ticks beside all the files and a tick
beside the
All option at the top of the list.
To export all the files : simply take the Next option from the Button Bar.
To export just a selection: clear the ticks against any files you do not wish to export, then
take the Next option. Note: Clearing the tick beside All clears all the ticks.
5. Use the dialogue that is displayed to select the folder into which you want to copy the
exported files. If needed, use the
Create new option offered on the Button Bar to create a
new folder in which to store these files.
Note: The files are stored under their existing names. The use of separate folders is therefore
recommended to distinguish between separate sets of User files.
6. Select OK from the Button Bar to copy the files to the selected location.
7. At the end of the process, you are returned to the Manage User Files dialogue. If you have
finished with the dialogue, select
Close (or Back then Close ).