OmniTek OTR 1001, Руководство пользователя

Страница: 43 / 390

OmniTek OTR 1001 User Guide, v3.1 B-15
Using Presets from other OmniTek systems
As well as using Presets set up and saved on your own system, you can also use Presets both
from other OTR systems and from OTM systems.
The option that enables you to do this is the Manage Disk option offered when you call up the
list of Presets (as well as at other points within the OTR application). Taking this option displays
a Manage User Files dialogue with options for Importing, Exporting or Deleting the different
types of file that you may have in your User area, which include Presets.
Further information is given in Section U.
Recording Presets
The following gives the steps used both to record individual Presets of the four different types
and to assign individual System Presets and/or combinations of individual View and/or Gen
and/or Config Presets to function keys.
Note: The procedure used for saving System Presets differs from that used to save View, Gen or
Config Presets.
Recording a View, Gen or Config Preset
Control Panel Mouse & Keyboard
To assign the current View, Gen or Config window set-up to a Preset:
1. Press the PRESET button to put the keypad
into ‘Preset’ mode.
2. Press and hold the appropriate numeric key to
assign the current window set-up to that Preset
number (or for numbers greater than 9, type
“* [number]”, then press and hold the Enter
key).
3. When the following dialogue appears, set a
suitable description then select
OK .
Figure B-5: Example Save Preset dialogue
1. Display the Presets toolbar shown below
(if not already displayed) and make it
the active window e.g by clicking on it.
2. Click and hold the appropriate key of
the numeric keypad within this toolbar
(or press and hold the corresponding key
of the numeric keypad on your
keyboard) to assign the current window
set-up to that Preset number.
Note: For numbers greater than 9, enter
the sequence “* number”, then click and
hold on the Enter button).
3. When the Save Preset dialogue appears,
set a suitable description then select
OK .