OmniTek OTR 1001, Руководство пользователя

Страница: 226 / 390

OmniTek OTR 1001 User Guide, v3.1 M-2
Figure M-1: Eye Diagram display
Adding Transport Layer Measurement to the OTR 1001
As mentioned above, the addition of transport layer measurement facilities to the OTR 1001
requires not only the installation of particular software options, it also requires a dedicated
Eye/Jitter card to be installed in the OTR 1001.
Installing the Eye/Jitter card is NOT an operation that can be carried out by the user. If none
of the EYE_xx options was included when the OTR 1001 was purchased, the
OTR 1001 will need to be returned to your OmniTek dealer to have the appropriate Eye/Jitter
card fitted.
You should also note that the OTR 1001 only has space for one additional card, which mean that
the Eye/Jitter card cannot be installed in a machine that includes the optional AES card described
in Section K (unless that card is removed).
Upgrading EYE_xx option
Where the OTR 1001 includes one of the EYE_xx options, upgrading to another of the EYE_xx
options (e.g. from EYE_SD to EYE_3G) is simply a matter of purchasing the appropriate option,
though you also need to ensure that you have purchased the VIDEO_xx package(s) that are
needed to work with the class of signal that you wish to analyse (see Section V).
For example, to analyse a 3G carrier signal, you will need EYE_3G, VIDEO_3G and
VIDEO_HD. If you just have VIDEO_HD, you will only be able to analyse SD or HD carrier
signals.