OmniTek OTR 1001, Руководство пользователя

Страница: 241 / 390

OmniTek OTR 1001 User Guide, v3.1 N-3
Set-up
Ensure that the OTR’s analysers are set to analyse the inputs you want to compare (as described
in Section T.4).
If you want to compare either input against an analog reference signal, use the Ref Loop
connectors on the rear of the OTR to provide the external analog reference to the system.
Note: If the reference signal is not being continued onto other systems, terminate the other BNC
on the REF loop with a 75Ω terminator.
Reference
Loop
SDI IN1 SDI IN2 SDI OUT1 SDI OUT2 ANA OUT
Figure N-2: Rear view of an OTR 1001 showing the Reference Loop connectors.
Display
The Reference Timing View is a member of the TIMING category.
Control Panel Mouse & Keyboard
To display the Reference Timing View:
Press the TIMING tile button until the
Reference Timing View appears. Select Reference Timing from the
TIMING section of the View Tile Browser.
(For more detailed instructions, see Section E.1.)
Display Properties
Other aspects of the Reference Timing display are determined by the tile’s properties, a complete
read-out of which is given in the Properties control (Control Panel: press PROPS to display).
Shortcuts to common settings are provided through the Button Bar (Control Panel: press
GENERAL or OTHER knob on the tile; Mouse/Keyboard: click on the tile to display).
Figure N-3: Reference Timing View Properties
Button Bar