OmniTek OTR 1001, Руководство пользователя

Страница: 132 / 390

OmniTek OTR 1001 User Guide, v3.1 I-8
Display Properties
What a Picture tile displays is set by the tile’s Properties. The properties that affect the
‘3D View’ displays are described below. The other more general settings are described in
Section F.1.
Note: The ‘3D View’ settings can only be accessed through the Properties control. There are no
shortcuts for any of these settings on the Button Bar.
Mode
The Mode needs to be set to 3D View in order to
enable the other 3D View settings within the Picture
tile’s properties.
3D View Settings
The 3D View Type setting within the 3D View
settings selects the image comparison tool used in the
current Picture tile, from a choice of:
Checkered – Selects a checkerboard pattern
of alternating segments from Signal Input 1
and Signal Input 2. The number of elements
across the width of the pattern is set from a
choice of 16, 32, 48, 64, 128 or 256 through
the
accompanying Checkerboard Size
setting. The height of the checkerboard lines
is set to match the width to give a square
pattern.
Difference – Left/Input 1 image minus
Right/Input 2 image.
Sum – Left/Input 1 image plus Right/Input 2
image.
Anaglyph – Left/Input 1 image displayed as
tones of red; Right/Input 2 image displayed as
tones of cyan. (When viewed using red/cyan
glasses, the image resulting from Stereo 3D
video appears as a three-dimensional image in
shades of grey.)
Alternate Left & Right – Images from the signal inputs are displayed alternately. The
number of frames for which each image is displayed is set as the Left/Right Toggle
Interval .
Figure I-5: 3D View section of
the Picture Properties.