OmniTek OTR 1001, Руководство пользователя

Страница: 348 / 390

OmniTek OTR1001 User Guide, v3.1 U-2
Figure U-1: Manage User Files dialogue
The left-hand side of this dialogue lists the different categories of User files that can be
exchanged between systems – together with a
Log files folder option that allows you to select
the location used to store any log files you create: see Section U.2; and a USB Drives option that
can be used to inspect the available USB Drives (and unmount any that are unneeded): also
described in Section U.2. The following User files are included:
A System Settings file comprising the current Configuration and all the Presets that are
currently in use (see below).
The Configuration comprising the settings made in the Config window (see Section T)
Presets , comprising the current default plus View presets, Gen presets, Config presets
and System presets (see Section B.4)
Event Log Captures (see Section J.2)
Loudness Logs (see Section J.3)
Closed Caption Logs (see Section J.4)
Generator Patterns , comprising all the images, captures, zoneplates and line patterns
currently known to your system
Moving the cursor through the list of categories displays alphabetical lists of the User files of
this type in the default area. Selecting a category from this list moves the cursor into the list of
items and adds tick boxes (and, where appropriate, an
All option) for you to use to identify
specific file selections from among the items shown e.g. for export. For Generator Patterns, a ‘ ..
’
entry is also added through which you can access other areas of the OTR’s disk space.
The Button Bar options enable you to import, export or delete User files as you require. The
Export and Delete options are greyed out where there are no User files of that type; the Import
option is greyed out for both types of Log file because it is not possible to import these files.
The various operations are described below. The steps are essentially the same for each type of User
file, but there are some special features to importing/exporting the Configuration and to importing/
exporting the overall System file. These are described in Sections U.6 and U.7 respectively.
IMPORTANT: Care is needed when transferring any Gen Preset from one machine to another to
ensure that the source files for each of the patterns in the Preset are also transferred and that
these are imported into the identical location on the destination system. In practice, this means
that it is only worth transferring a Gen Preset where all the patterns refer to either ‘Factory’
supplied images or images that have been captured to the default location on your system
(because that is the only location into which you can import Generator Patterns). You should
also be aware that any System Preset that you transfer includes a similar set of details about the
patterns on the Gen window at the time the Preset was saved.