OmniTek OTR 1001, Руководство пользователя

Страница: 275 / 390

OmniTek OTR 1001 User Guide, v3.1 Q-9
Q.4 Deleting Patterns
Patterns that are no longer needed in the Gen window can be deleted as follows, while images
etc. saved on disk can be deleted using the
Manage Disk facility described in Section U:
Control Panel Mouse & Keyboard
To delete a pattern from the Gen window:
1. Move the focus to the pattern you want to
delete.
2. Select the Delete Pattern option from the
Button Bar.
Either: Click on the pattern you want to
delete and take the Delete Pattern option
from the Button Bar.
Or: Right-click on the pattern you want to
delete and take the Delete option from the
‘right-click’ menu.
Note: The above procedure deletes one pattern at a time. Where you want to delete all the
patterns that are currently selected, a better route is provided by taking the Clear option from the
File menu (called up from the Button Bar). This automatically clears the current set of patterns
from the Gen window.
Q.5 Playing Out Test Patterns
Preparation for Play-Out
Before a video clip or a test pattern such as a zoneplate can be played out as a test signal:
The selected item needs to be added to the Gen window (as described in Section Q.1)
Any audio etc. that is required needs to have been added to the item – as described in
Section Q.6 and following, and
The Output Video Standard needs to be set to the required video standard (as described in
Section P.2)
Note: If the selected output video standard differs from the video standard for which the selected
pattern was created, then to fit the image to the output video standard, the image may need to be
resized either horizontally or vertically or both. The various re-sizing options are offered through
a
Resize Type option included in the Properties control, together with a None option. The None
option should be taken where it is important to maintain the aspect ratio.
Figure Q-7:
Gen window’s Properties control showing Resize options