OmniTek OTR 1001, Руководство пользователя

Страница: 274 / 390

Q-8 OmniTek OTR 1001 User Guide, v3.1
Hence the translation between different resolutions is necessarily slightly approximate. If the
height of each band is of particular importance, then generate the pattern in the standard you
wish to use it in.
Modifying a Line Pattern
To modify a line pattern, simply call up the Properties control. The entry for the line pattern will
be the same Line Pattern editor as was seen when the line pattern was created , set up to define
the current line pattern.
Control Panel Mouse & Keyboard
To change any aspect of the line pattern:
1. Move the focus to the line pattern.
2. Call up the Properties control.
3. Use the entries in the Properties control to define the line pattern you now require.
4. Use the Save pattern option in the File menu (called up from the Button Bar) to record the
new version on disk.
Note: The changes you make are not automatically saved to disk.
Q.3 Saving Patterns
Save pattern and Save pattern as… options are used to preserve details of the patterns on disk,
both in the File menu and in the ‘right-click’ menu. The
Save pattern as option saves a copy in
a chosen location on disk; the Save pattern option either overwrites an existing file on disk or, if
the pattern is unsaved, saves it in your User area under a standardised name, based on the time
and date (alongside settings etc.). The progress bar is coloured yellow as the image(s) are saved.
Note: Patterns stored in your User area can subsequently be exported elsewhere: see Section U.
Control Panel Mouse & Keyboard
To save a new version of an existing pattern under its current name ,
Take the Save
pattern option
from the File
menu (called
up from the
Button Bar).
Either take the Save pattern option from
the File menu or take the Save option from
the ‘right-click’ menu.
To save a new pattern in your User area:
Take the Save pattern option from the File
menu
Either take the Save pattern option from
the File menu or take the Save option from
the ‘right-click’ menu.
To save a new pattern elsewhere on disk
Take the
Save pattern as…
option and use
the file selector that is displayed to set
where the pattern is stored.
Either take the Save pattern as… option or
take the Save option from the ‘right-click’
menu and use the file selector that is
displayed to set where the pattern is stored.