Remove a reserved LAN IP address entry [router mode]
If the AP is in router mode, you can remove a reserved LAN IP address entry that you
no longer need.
To remove a reserved LAN IP address entry:
1. Launch a web browser from a computer or mobile device that is connected to a WiFi
network or LAN port on the AP.
2. Enter http://www.routerlogin.net in the address field.
A login window displays.
If your browser displays a security warning, dismiss the warning. For more information,
see Dismiss a browser security warning on page 39.
3. Enter the AP local device password.
The local device password is the one that you specified. The local device password
is case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Setup > LAN Setup.
The LAN Setup page displays.
5. In the Address Reservation table, select the radio button for the reserved address.
6. Click the Delete button.
The IP address entry is removed.
Change the MTU size [router mode]
If the AP is in router mode, you can change the maximum transmission unit (MTU).
The MTU is the largest data packet a network device transmits. When one network
device communicates across the Internet with another, the data packets travel through
many devices along the way. If a device in the data path uses a lower MTU setting than
the other devices, the data packets must be split or “fragmented” to accommodate the
device with the smallest MTU.
User Manual
83
Network Settings
WiFi 6 AX1800/AX3200 Dual Band Wireless Access Points, WAX202 and WAX206
