The BASIC Home page displays.
4. Select ADVANCED > Advanced Setup > Wireless Settings.
The Wireless Settings page displays.
5. From the 2.4 GHz Channel or 5 GHz Channel menu, select a channel.
For the 2.4 GHz radio, the default is Auto, which means that the radio automatically
selects the most suitable channel. When you select a particular channel, the channel
selection becomes static. For the 5 GHz radio, the default channel depends on the
region.
6. Click the Apply button.
Your settings are saved. The radio or radios restart and WiFi clients might need to
reconnect.
Change the WiFi throughput mode for a
radio
By default, all types of WiFi clients can access a WiFi network on the AP. The AP supports
WiFi throughput modes 802.11ax, 802.11ac, 802.11a, 802.11n, 802.11g, and 802.11b.
You can change the WiFi throughput mode for a radio to better suit your WiFi
environment. However, in doing so, you might limit the speed that some WiFi clients
are capable of.
Change the WiFi throughput mode on model WAX202
To change the WiFi throughput mode for a radio on model WAX202:
1. Connect your computer or mobile device to the AP in one of the following ways
•
Connect directly to the AP’s WiFi network or LAN. (Applies to the AP in either
operation mode.)
•
Connect to the same network that the AP is connected to. (Applies only if the AP
is operating in AP mode.)
2. Launch a web browser and enter http://www.routerlogin.net in the address field.
Instead, if you are connected to same network as the AP, enter the LAN IP address
that is assigned to the AP. For information about finding the IP address, see Find the
IP address of the AP when you cannot use routerlogin.net on page 34.
A login window displays.
User Manual
124
Advanced WiFi and Radio
Features
WiFi 6 AX1800/AX3200 Dual Band Wireless Access Points, WAX202 and WAX206
