The BASIC Home page displays.
4. Select ADVANCED > Security > Access Control.
The Access Control page displays.
5. Select the Turn on Access Control check box.
You must select this check box before you can specify an access rule and use the
Allow all new devices to connect and Block all new devices from connecting
buttons. When the Turn on Access Control check box is cleared, all devices are
allowed to connect, even if a device is in the list of blocked devices.
6. Click the Apply button.
Your settings are saved.
7. Select an access rule for new devices that are not currently connected:
• Allow all new devices to connect: A new device can access your network. You
do not need to enter the MAC address. We recommend that you leave this radio
button selected.
• Block all new devices from connecting: Before a new device can access your
network, you must enter its MAC address in the allowed list. For more information,
see Network access control lists on page 68.
The access rule does not affect previously blocked or allowed devices. It applies
only to devices joining your network in the future after you apply these settings.
8. To manage future access for currently connected devices, do the following:
•
Allow your current device: If you blocked all new devices, you can allow the
device that you are currently using to continue to access the network. Select the
check box next to your device in the table, and click the Allow button.
•
Allow or block a device: To change the allow or block settings for a device that
is currently connected, select the check box next to the device in the table, and
click either the Allow button or the Block button.
•
Change the device name that is displayed: To change the displayed name for
a device that is currently connected, do the following, and click either the Allow
button or the Block button.
a. Select the check box next to the device in the table.
b. Click the Edit button.
The Edit Allowed Device or Edit Blocked Device page displays.
c. In the Device Name field, change the name.
d. Click the Apply button.
The Access Control page displays again.
User Manual
69
Firewall Security and Access
Rules
WiFi 6 AX1800/AX3200 Dual Band Wireless Access Points, WAX202 and WAX206
