Display the Internet port statistics
To display the Internet port statistics:
1. Connect your computer or mobile device to the AP in one of the following ways
•
Connect directly to the AP’s WiFi network or LAN. (Applies to the AP in either
operation mode.)
•
Connect to the same network that the AP is connected to. (Applies only if the AP
is operating in AP mode.)
2. Launch a web browser and enter http://www.routerlogin.net in the address field.
Instead, if you are connected to same network as the AP, enter the LAN IP address
that is assigned to the AP. For information about finding the IP address, see Find the
IP address of the AP when you cannot use routerlogin.net on page 34.
A login window displays.
If your browser displays a security warning, dismiss the warning. For more information,
see Dismiss a browser security warning on page 39.
3. Enter the AP local device password.
The local device password is the one that you specified. The local device password
is case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED.
The ADVANCED Home page displays.
5. In the Internet Port pane (in router mode) or in the LAN Port pane (in AP mode), click
the Show Statistics button.
A pop-up window displays, showing the following information:
•
System Up Time: The time elapsed since the AP was last restarted.
•
Port: The statistics for the WAN (Internet) port, LAN (Ethernet) ports, and WLANs.
For each port, the window displays the following information:
-
Status: The link status of the port.
-
TxPkts: The number of packets transmitted on this port since reset or manual
clear.
-
RxPkts: The number of packets received on this port since reset or manual
clear.
-
Collisions: The number of collisions on this port since reset or manual clear.
User Manual
110
Maintain and Monitor
WiFi 6 AX1800/AX3200 Dual Band Wireless Access Points, WAX202 and WAX206
