5. If the table with allowed devices does not display, click the View list of allowed
devices not currently connected to the network link.
A table displays the detected device name, MAC address, and connection type of
the devices that are not connected but allowed to access the network.
6. To add a device to the allowed list, do the following:
a. Click the Add button.
The Add Allowed Device page displays.
b. Enter the MAC address and device name for the device that you want to allow.
c. Click the Apply button.
The device is added to the allowed list. The Access Control page displays again.
7. To remove a device from the allowed list, do the following:
a. Select the check box for the device.
b. Click the Remove from the list button.
The device is removed from the allowed list.
8. To change the MAC address or name for a device on the allowed list, do the
following:
a. Select the check box for the device.
b. Click the Edit button.
The Edited Allowed Device page displays.
c. Change the MAC address, device name, or both.
d. Click the Apply button.
The Access Control page displays again.
9. Click the Apply button.
Your settings are saved.
Add, remove, or change a device on the blocked list
If you set up an access list that allows all new devices to access your network (see Enable
and manage network access control on page 68) but you want to block some devices,
you must set up a blocked list that defines which WiFi and wired devices are blocked
User Manual
71
Firewall Security and Access
Rules
WiFi 6 AX1800/AX3200 Dual Band Wireless Access Points, WAX202 and WAX206
