Change the region of operation
You can change the region of operation, which is region in which you operate the AP.
For some countries such as North America, you cannot change the region because it is
preset.
Note: Make sure the country is set to the location where the device is operating. You
are responsible for complying within the local, regional, and national regulations set
for channels, power levels, and frequency ranges.
WARNING:
It might not be legal to operate the AP in a region other than the regions
listed in the menu. If your country or region is not listed, check with your local government
agency.
To change the region of operation:
1. Connect your computer or mobile device to the AP in one of the following ways
•
Connect directly to the AP’s WiFi network or LAN. (Applies to the AP in either
operation mode.)
•
Connect to the same network that the AP is connected to. (Applies only if the AP
is operating in AP mode.)
2. Launch a web browser and enter http://www.routerlogin.net in the address field.
Instead, if you are connected to same network as the AP, enter the LAN IP address
that is assigned to the AP. For information about finding the IP address, see Find the
IP address of the AP when you cannot use routerlogin.net on page 34.
A login window displays.
If your browser displays a security warning, dismiss the warning. For more information,
see Dismiss a browser security warning on page 39.
3. Enter the AP local device password.
The local device password is the one that you specified. The local device password
is case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Advanced Setup > Wireless Settings.
The Wireless Settings page displays.
5. From the Region menu, select the region in which the AP must operate.
6. Click the Apply button.
Your settings are saved. The AP restarts with the settings for the new region.
User Manual
118
Advanced WiFi and Radio
Features
WiFi 6 AX1800/AX3200 Dual Band Wireless Access Points, WAX202 and WAX206
