To change the DHCP pool of IP addresses that the AP assigns:
1. Launch a web browser from a computer or mobile device that is connected to a WiFi
network or LAN port on the AP.
2. Enter http://www.routerlogin.net in the address field.
A login window displays.
If your browser displays a security warning, dismiss the warning. For more information,
see Dismiss a browser security warning on page 39.
3. Enter the AP local device password.
The local device password is the one that you specified. The local device password
is case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Setup > LAN Setup.
The LAN Setup page displays.
5. Make sure that the Use Router as DHCP Server check box is selected.
This check box is selected by default.
6. Specify the range of IP addresses that the router assigns for the LAN subnet:
•
In the Starting IP Address field, enter the lowest number in the range.
This IP address must be in the same LAN subnet.
•
In the Ending IP Address field, enter the number at the end of the range of IP
addresses.
This IP address must be in the same LAN subnet.
7. To change the DHCP lease time, from the DHCP Lease Time menu, select a period
from 1 hour to 24 hours.
By default, the period is 24 hours. When the lease time expires, the DHCP server
releases the IP address, and a DHCP client must reconnect to get a new (or the same)
IP address from the DHCP server.
8. Click the Apply button.
Your settings are saved.
User Manual
77
Network Settings
WiFi 6 AX1800/AX3200 Dual Band Wireless Access Points, WAX202 and WAX206
