Specify which activities the AP logs
You can specify which activities the AP logs. These activities display in the log.
To manage which activities are logged:
1. Connect your computer or mobile device to the AP in one of the following ways
•
Connect directly to the AP’s WiFi network or LAN. (Applies to the AP in either
operation mode.)
•
Connect to the same network that the AP is connected to. (Applies only if the AP
is operating in AP mode.)
2. Launch a web browser and enter http://www.routerlogin.net in the address field.
Instead, if you are connected to same network as the AP, enter the LAN IP address
that is assigned to the AP. For information about finding the IP address, see Find the
IP address of the AP when you cannot use routerlogin.net on page 34.
A login window displays.
If your browser displays a security warning, dismiss the warning. For more information,
see Dismiss a browser security warning on page 39.
3. Enter the AP local device password.
The local device password is the one that you specified. The local device password
is case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Administration > Logs.
The Logs page displays.
5. Select the check boxes that correspond to the activities that you want to be logged.
By default, the following check boxes are selected:
•
Connections to the Web-based interface of this Router
(A log entry is created when someone makes a connection to the local browser
UI of the AP).
•
Router operation (startup, get time, etc)
•
Known DoS attacks and Port Scans
•
Wireless access
(A log entry is created when someone connects to a WiFi network on the AP.)
•
Turn off wireless signal by schedule
(A log entry is created when a radio is turned on or off because of a WiFi schedule.)
User Manual
102
Maintain and Monitor
WiFi 6 AX1800/AX3200 Dual Band Wireless Access Points, WAX202 and WAX206
